Glue
From wipipedia.org
(Difference between revisions)
|
|
| Line 1: |
Line 1: |
| − | Many [[latex]] garments are made by gluing pieces of latex sheet together.
| + | #REDIRECT [[Glued latex]] |
| − | | + | |
| − | ==Types of Glues for Latex==
| + | |
| − | Two basic types of glue are usually used:
| + | |
| − | | + | |
| − | '''1) Organic solvent based'''
| + | |
| − | | + | |
| − | Various rubber cements can be used to glue sheets of latex together. Some brands are:
| + | |
| − | | + | |
| − | * Best Test Rubber Cement
| + | |
| − | * Bostik 3851
| + | |
| − | * Elmer's Rubber Cement
| + | |
| − | * Ross Rubber Cement
| + | |
| − | * Rema TipTop vulcanising solution
| + | |
| − | | + | |
| − | Rubber cements are usually thinned with heptane, a.k.a. Rubber Cement Thinner, which is used to prepare surfaces for gluing with the cement. (Bostik 6009 type 4 cleaner/thinners)
| + | |
| − | | + | |
| − | '''2) Water and ammonia based'''
| + | |
| − | | + | |
| − | Some brands are:
| + | |
| − | | + | |
| − | * Copydex
| + | |
| − | * Bostik Aquagrip 260 (now replaced by 218M Plustex)
| + | |
| − | * Blackstyle latexkleber
| + | |
| − | | + | |
| − | Bonds made with water/ammonia glues are said to deteriorate when exposed to water, although some people say the bonds are just as long-lasting as those made with organic solvent glues.
| + | |
| − | | + | |
| − | ==Gluing Technique==
| + | |
| − | | + | |
| − | A good way to apply the glue to a latex sheet is to use a credit card and spread it out on both surfaces. Let it dry for about 15 minutes and then attach the two surfaces together. Go over the seam with a roller and it will finish the seam. Wait for the seam to cure for 24 hours before putting stress on the glued area.
| + | |
| − | | + | |
| − | ==See also==
| + | |
| − | * [[Glued latex]]
| + | |
| − | | + | |
| − | {{Latexwiki|Glue}}
| + | |
| − | | + | |
| − | [[Category:Rubber]]
| + | |
Latest revision as of 14:17, 1 March 2009
- REDIRECT Glued latex
