Carrara Designs - Personal Experiences
| Line 76: | Line 76: | ||
| − | [[Image: | + | [[Image:locintern1.jpg|thumb|left|13.]] |
| + | [[Image:locintern2.jpg|thumb|left|14.]] | ||
| + | [[Image:locintern1.jpg|thumb|left|13.]] | ||
| + | [[Image:locintern1.jpg|thumb|left|13.]] | ||
| + | [[Image:locintern1.jpg|thumb|left|13.]] | ||
| + | [[Image:locintern1.jpg|thumb|left|13.]] | ||
Revision as of 08:23, 29 December 2009
Contents |
HIGH-SECURITY CARRARA CHASTITYBELT FOR MALE SLAVES
BenHur's experience of the Carrara Designs male chastity belt.
Carrara Designs in Belgium since a few years produce both male and female chastity belts of several types, that are based on the traditional belted design with a lockable belt going around the waist and a second steel strap passing between the legs that, in the male version, holds the cock cage in place (pic 1). In a lot of aspects this excellent belt, that is made to measure to fit as perfect as possible, differs from the standard and is more complicated, and therefore is described more extensively below.
The pictures show the most elaborate design Carrara has to offer customers, an extremely heavy high-security chastity belt for men, covering both the testicles and penis of the wearer with a huge protector - a cocktube between two ballcages - forged together with a rigid steel case containing the ingenious locking system (pics 5 and 6). Older more simple models delivered by the same manufacturer restricted themselves to enveloping the penis only, showing the balls openly; compared to the newer one the wearer of this standard type of belt looks rather naked (pic 4).
In the female version of the Carrara, which is nearly as huge as the male belt, instead of the complicated wrapping of the male genitals, the slightly bulging vast frontal plate is directly covering with one big curve the whole vaginal area (pic 3).
The belt is made entirely of very thick stainless steel (total weight of the male version: 1.8 kilos!) and closes with only one very well-protected lock in the upper half of the protector, that holds all parts of the belt immovably together. For extra safety it comes with two identical special sawn off keys, which cannot be copied in a standard locksmith's shop.
Desexualisation of the wearer
The belts for men and women from the outside look, at first sight, very similar (pics 2 and 3), the enormous eye-catching protector in front in both cases screening the whole genital zone from curious looks. Thus, by hiding the sex of the wearer, in a way the belt desexualizes the male slave. The visual differences between both belts are subordinate to the simularities, making belted male and female slaves looking more alike, which especially in mixed slavecompany will have a profound psychological effect on the male part. The protectorplate of their version of the common worn model of chastitybelt will be only a little bit wider, as it has to cover the testicles too.
Thus for the wearer the vital parts of his masculinity are not only totally covered by steel and thus made inaccessible, but even their existence as such in a humiliating way is nearly denied, because their distinguishing male extension is reduced to nil. In contrast to a lot of other chastity devices which may strike the eye by their emphasized protruding cockshells, the central penis tube of a Carrara in fact may often be nearly invisible, being not more than just a narrow and slight bulge in the allready slightly bended huge continuous genital plate of steel reaching without interruption from navel till crotch. This is especially the case if the wearer has big testicles, and thus the ball cage has to be big too (pic 7).
Total chastity
By using a Carrara for disciplining a slave, his absolute chastity will be guaranteed. Perhaps the most restricting and secure male chastity belt up till now, it makes masturbation, orgasm and sexual intercourse (both genital and anal) totally impossible and can be worn permanently. The belt fits like a second skin of steel around the waist of the wearer, and if applied and locked carefully there is no risk that he can escape his fate. The keyholder can leave him with a clear conscience alone.
In contrast to most other belts, for more security the protector also covers the testicles completely, which explains its extraordinary weight and width. The outward ends of the grated cage-like structures for the balls on both sides of the penistube reach to the skin of the lower belly of the wearer (no.6 on pics 8 and 9), leaving only small room for touching the testicles with pains from behind, thus making serious sexual stimulation impossible. Also the bars of both the cages, which looks a little like a squeezer with which boiled eggs are cut into slices, are such near to each other, that the balls can't get aroused by the wearer with help of his fingers along that way.
The penis for the same security reason is further locked away in a separate and totally closed penis tube inside the protector (see pic 6 and no.5 on pics 8 and 9) between the two ball-cages, that also make the entrance of the tube inaccessible, preventing any attempt to pull the penis out. They indeed make it nearly impractical for the wearer to touch even the roots of his penis. The tube itself moreover is curved to make even erection, let alone ejaculation, impossible, and thus increases sexual frustration. As it lacks any internal lining, even a little stiffening of the penis, longing for a delivering orgasm, will be severely punished, as the sensitive glans will in that case touch the hard walls of the tube. For that reason a new wearer immediately after becoming belted for the first time better starts to train himselve very quickly to become able to avoid all spontaneous erections.
Trying to get that orgasm by 'fucking' the tube, as is sometimes a (although rather painfull) 'solution' for horny wearers of other belts, who are getting mad of not cumming fo a long time, to end their enforced chastity, is nearly impossible. The protector is much to big and clumsy for moving it up and down quickly, which of course in behalf of the keyholder increases the desired security of the belt in respect of absolute chastity very much.
No risk of escape
Because the Carrara is of the traditional Florentine type, with a waistbelt, a big front shield and a narrow string over the perineum, there is no risk that the slave will escape out of the locked belt, as long as it is applied tight enough around his body. The steel of the encircling waistbelt is not less than 2mm thick and can't be broken without very strong tools, and it is absolutely impossible for the wearer to push it downwards over the hips to get the protector low enough to pull his penis out of the tube. To finish, the string covering his ass (pic 12), preventing anal penetration, connects the back of the waistband (pic 11) inexorable with the lower end of the protector and thus makes escape inconceivable.
Moreover the belt possesses an ingenious locking system, which one cannot easily destroy without very crude methods that will not go undetected by the keyholder. This makes the belt very safe. The shackle of the small gold-coloured padlock in the front plate is totally covered by the steel case attached to the protector to prevent destruction with bolt cutters (no.2 in pics 8 and 9). Both ends of the waist-band are flat strips that fit into a groove on the left and right top corner of the case (no.4 in the pics). On the far end of each of this strips there is one small knob that can be hooked in the down-direction in 5 different slots inside the steel case for adjustability, to apply the belt to the wearer for maximum security as tight as possible.
Once the right tension is found, another small knob on the upper end of the locking block (no.1 in the pics), just above the built-in padlock, only has to be pushed down to pull the hidden shackle into the visible gold-coloured case (no.2) of the padlock and thus lock the system definitively by pushing the walls of the grooves together and thereby pinning both knobs in the chosen slots, whereafter the key can taken out of the padlock from the flat recess at its lower side (no.3) and the wearer will stay chaste.
See also the seperate chapter 'Locking mechanism' with pics 13-18.
Hygiene
As the Carrara is designed for long-term use, all other normal body functions can be performed by the belted wearer without problems, as it prevents only the sexual ones. The ass-string which ensures anal chastity allows defecation without problems by pushing it slightly sideways. Quite as the frontplate of the female belt is pierced in the lower half for that reason, also in the case of the male belt a row of tiny holes at the lower end of the tube makes normal urination unproblematic while the belt stays securely locked on, the separate holes of which at the same time are to small to give access for stimulation (pic 10). Because of this arrangement, the wearer is not able to use urinals anymore, and will always be forced to sit down and do things very slowly to avoid a mess.
For regular daily hygiene, opening the belt isn't necessary too, so there is no risk of endangering the chastity of the wearer either. Being belted, he can take a shower or a bath without problems. Only after some weeks it will be necessary to unlock the belt for intensive cleaning. But as it is covering a big part of the slave's body, it is important to clean the genital zone everyday extensively; the grates of the ball-cage and the holes of the penistube are helpfull for that. Nevertheless, due to the extraordinary size of the protector, in case of long periods of wearing, regular shaving of the pubic hair (i.e. totally clean-shaven every fortnight at least) is very advisable to have sweatening reduced at most.
Comfort
As the belt, which for all those security-reasons is not only much heavier, but also more severe to wear than most other models and takes the wearer a lot of time to get accustomed to, maybe has to be worn for long uninterumpted periods and thus also at work, it is so designed that it is invisible under normal clothes. The outward form of the belt follows s nearly as possible the form of the body. There are no bulges on unusual, and thus suspect places, because the padlock - which elsewhere is often protruding - of the Carrara is totally hidden. Even the huge protector itself doesn't show. Apart from that, it is contoured to the area between the legs, and does not affect walking and sitting by the wearer too much.
A lot of hinges allows the belt to adjust its position easily to movements of the body, as the separate steel pieces of the waist-band can't be bend easily. In contrast to most other chastity belts, the waist belt isn't straight, but curves up and down over the hips, following the contours of the body. The protector shield in the front is placed rather low, to stop it from pushing into the ribs while sitting. The belt is adaptable to changes in body circumference, as it can be secured around the waist in five different positions indeed, but once one is chosen and the belt is locked at that width, of course no change is possible any more, and the belt will show itself relentless to the wearer.
For more comfort, the thick steel waistband is lined on the inside with enough neoprene to ensure that the steel will not touch the skin anywhere, apart from the aggravated part around the genitals itself. The string covering the anus is for the same reason encased with rubber too. Nevertheless, because of the great weight, the not very flexible steel and the necessary tight fitting, the wearer will still be reminded of his locked-up state permanently.
Locking mechanism
The pics show the functioning of the special locking mechanism step by step, described above.
For a more clear view of the closingprocedure of the belt the steel case that hides the padlock is laid open.
