Carrara Designs - Personal Experiences

From wipipedia.org
Revision as of 05:45, 5 January 2010 by BenHur (Talk | contribs)

Jump to: navigation, search


1. A muzzled male slave wearing the heavy Carrara chastitybelt
2. The Carrara in use for disciplining a male slave
3. The female version of the Carrara in use. Note the little difference in outward appearance, compared with the male belt
4. The older model of Carrara Design, still without ball-cages, thus showing the testicles of the wearer in a very emphatic way

Contents

HIGH-SECURITY CARRARA CHASTITYBELT FOR MALE SLAVES

BenHur's experience of the Carrara Designs male chastity belt.

Carrara Designs in Belgium since a few years produce both male and female chastity belts of several types, that are based on the traditional belted design with a lockable belt going around the waist and a second steel strap passing between the legs that, in the male version, holds the cock cage in place (pic 1). In a lot of aspects this excellent belt, that is made to measure to fit as perfect as possible, differs from the standard and is more complicated, and therefore is described more extensively below.

The pictures show the most elaborate design Carrara has to offer customers, an extremely heavy high-security chastity belt for men, covering both the testicles and penis of the wearer with a huge protector - a cocktube between two ballcages - forged together with a rigid steel case containing the ingenious locking system (pics 5 and 6). Older more simple models delivered by the same manufacturer restricted themselves to enveloping the penis only, showing the balls openly; compared to the newer one the wearer of this standard type of belt looks rather naked (pic 4).

In the female version of the Carrara, which is nearly as huge as the male belt, instead of the complicated wrapping of the male genitals, the slightly bulging vast frontal plate is directly covering with one big curve the whole vaginal area (pic 3).

The belt is made entirely of very thick stainless steel (total weight of the male version: 1.8 kilos!) and closes with only one very well-protected lock in the upper half of the protector, that holds all parts of the belt immovably together. For extra safety it comes with two identical special sawn off keys, which cannot be copied in a standard locksmith's shop.

Desexualisation of the wearer

The belts for men and women from the outside look, at first sight, very similar (pics 2 and 3), the enormous eye-catching protector in front in both cases screening the whole genital zone from curious looks. Thus, by hiding the sex of the wearer, in a way the belt desexualizes the male slave. The visual differences between both belts are subordinate to the simularities, making belted male and female slaves looking more alike, which especially in mixed slavecompany will have a profound psychological effect on the male part. The protectorplate of their version of the common worn model of chastitybelt will be only a little bit wider, as it has to cover the testicles too.

Thus for the wearer the vital parts of his masculinity are not only totally covered by steel and thus made inaccessible, but even their existence as such in a humiliating way is nearly denied, because their distinguishing male extension is reduced to nil. In contrast to a lot of other chastity devices which may strike the eye by their emphasized protruding cockshells, the central penis tube of a Carrara in fact may often be nearly invisible, being not more than just a narrow and slight bulge in the allready slightly bended huge continuous genital plate of steel reaching without interruption from navel till crotch. This is especially the case if the wearer has big testicles, and thus the ball cage has to be big too (pic 7).

5. A brand-new Carrara chastitybelt ready to be locked on a new male slave for the first time. Note the small keys still sticking from underneath into the gold-coloured encased padlock above the only slightly bulging penistube
6. Inside view of the male Carrara waiting for use. Note the white entrance of the penistube between both halves of the ballcage
7.The heavy male Carrara high-security chastitybelt securely locked on. Note that the penistube this time is nearly invisible, thus reducing the difference in overall-form with the protector of the female belt to mere width because of the narrowly grated ballcages
8.Front view of the protector. The several ciphers are explained in the text of to the left
9.Sideview of the protector
10.The totally closed penistube between the grated ball-cages seen from underneath. The vertical row of small holes for urination is just visible at the far end near the bolts that fixes the tube to the ass-string that connects the protector with the back of the waistbelt

Total chastity

By using a Carrara for disciplining a slave, his absolute chastity will be guaranteed. Perhaps the most restricting and secure male chastity belt up till now, it makes masturbation, orgasm and sexual intercourse (both genital and anal) totally impossible and can be worn permanently. The belt fits like a second skin of steel around the waist of the wearer, and if applied and locked carefully there is no risk that he can escape his fate. The keyholder can leave him with a clear conscience alone.

In contrast to most other belts, for more security the protector also covers the testicles completely, which explains its extraordinary weight and width. The outward ends of the grated cage-like structures for the balls on both sides of the penistube reach to the skin of the lower belly of the wearer (no.6 on pics 8 and 9), leaving only small room for touching the testicles with pains from behind, thus making serious sexual stimulation impossible. Also the bars of both the cages, which looks a little like a squeezer with which boiled eggs are cut into slices, are such near to each other, that the balls can't get aroused by the wearer with help of his fingers along that way.

The penis for the same security reason is further locked away in a separate and totally closed penis tube inside the protector (see pic 6 and no.5 on pics 8 and 9) between the two ball-cages, that also - in contrast to the older simple model (pic 4) - make the underside of the entrance of the tube inaccessible, preventing any attempt by the wearer to pull the penis out with his fingers. They indeed make it nearly impractical for him to touch even the roots of his penis. The tube itself moreover is curved to make even erection, let alone ejaculation, impossible, and thus increases sexual frustration. As it lacks any internal lining, allready a little stiffening of the penis, longing for a delivering orgasm, will be severely punished, as the sensitive gland will in that case touch the hard walls of the tube. For that reason a new wearer immediately after becoming belted for the first time better starts to train himselve very quickly to become able to avoid all spontaneous erections.

Trying to get that orgasm by 'fucking' the tube to end the enforced chastity, as is sometimes a (although rather painfull) 'solution' for horny wearers of other belts who are getting mad of not cumming for a long time, is nearly impossible. The protector is much to big and clumsy for moving it up and down quickly, which of course in behalf of the keyholder increases the desired security of the belt in respect of absolute chastity very much.

No risk of escape

Because the Carrara is of the traditional Florentine type, with a waistbelt, a big front shield and a narrow string over the perineum, there is no risk that the slave will escape out of the locked belt, as long as it is applied tight enough around his body. The steel of the encircling waistbelt is not less than 2mm thick and can't be broken without very strong tools, and it is absolutely impossible for the wearer to push it downwards over the hips to get the protector low enough to pull his penis out of the tube. To finish, the string covering his ass (pic 12), preventing anal penetration, connects the back of the waistband (pic 11) inexorable with the lower end of the protector and thus makes escape inconceivable.

Moreover the belt possesses an ingenious locking system, which one cannot easily destroy without very crude methods that will not go undetected by the keyholder. This makes the belt very safe. The shackle of the small gold-coloured padlock in the front plate is totally covered by the steel case attached to the protector to prevent destruction with bolt cutters (no.2 in pics 8 and 9). Both ends of the waist-band are flat strips that fit into a groove on the left and right top corner of the case (no.4 in the pics). On the far end of each of this strips there is one small knob that can be hooked in the down-direction in 5 different slots inside the steel case for adjustability, to apply the belt to the wearer for maximum security as tight as possible.

Once the right tension is found, another small knob on the upper end of the locking block (no.1 in the pics), just above the built-in padlock, only has to be pushed down to pull the hidden shackle into the visible gold-coloured case (no.2) of the padlock and thus lock the system definitively by pushing the walls of the grooves together and thereby pinning both knobs in the chosen slots, whereafter the key can taken out of the padlock from the flat recess at its lower side (no.3) and the wearer will stay chaste.

See also the seperate chapter 'Locking mechanism' with pics 13-18.

11.Rearview of the Carrara locked on, showing the thick and high waistband encircling the slave's belly, the triangular traverse plate protecting the tail-bone, the connecting ass-string and the lower end of the penistube

Hygiene

As the Carrara is designed for long-term use, all other normal body functions can be performed by the belted wearer without problems, as it prevents only the sexual ones. The ass-string which ensures anal chastity allows defecation without problems by pushing it slightly sideways. Quite as the frontplate of the female belt is pierced in the lower half for that reason, also in the case of the male belt a row of tiny holes at the lower end of the tube makes normal urination unproblematic while the belt stays securely locked on, the separate holes of which at the same time are to small to give any access for stimulation (pic 10). Because of this arrangement, the wearer will not be able to use urinals anymore, and will always be forced to sit down and do things very slowly to avoid a mess.

For regular daily hygiene, opening the belt isn't necessary too, so there is no risk of endangering the chastity of the wearer either. Being belted, he can take a shower or a bath without problems. The padlock is of rustproof steel and thus water is no problem. Only after some weeks it will be necessary to unlock the belt for intensive cleaning. But as it is covering a big part of the slave's body, it is important to clean the genital zone everyday extensively; the grates of the ball-cage and the holes of the penistube are helpfull for that. Nevertheless, due to the extraordinary size of the protector, in case of long periods of wearing, regular shaving of the pubic hair (i.e. totally clean-shaven every fortnight at least) is very advisable to have sweatening reduced at most.

12.Ass-string of the Carrara

Comfort

As the belt, which for all those security-reasons is not only much heavier, but also more severe to wear than most other models and takes the wearer a lot of time to get accustomed to, maybe has to be worn for long uninterumpted periods and thus also at work, it is so designed that it is invisible under normal clothes. The outward form of the belt follows s nearly as possible the form of the body. There are no bulges on unusual, and thus suspect places, because the padlock - which elsewhere is often protruding - of the Carrara is totally hidden. Even the huge protector itself doesn't show. Apart from that, it is contoured to the area between the legs, and does not affect walking and sitting by the wearer too much.

A lot of hinges allows the belt to adjust its position easily to movements of the body, as the separate steel pieces of the waist-band can't be bend easily. In contrast to most other chastity belts, the waist belt isn't straight, but curves up and down over the hips, following the contours of the body. The protector shield in the front is placed rather low, to stop it from pushing into the ribs while sitting. The belt is adaptable to changes in body circumference, as it can be secured around the waist in five different positions indeed, but once one is chosen and the belt is locked at that width, of course no change is possible any more, and the belt will show itself relentless to the wearer.

For more comfort, the thick steel waistband is lined on the inside with enough neoprene to ensure that the steel will not touch the skin anywhere, apart from the aggravated part around the genitals itself. The string covering the anus is for the same reason encased with rubber too. Nevertheless, because of the great weight, the not very flexible steel and the necessary tight fitting, the wearer will still be reminded of his locked-up state permanently.

Locking mechanism

The pics underneath show the functioning of the above described special high-security locking mechanism, that makes the Carrara chastitybelt extremely safe, step by step.

For a more clear view of the closingprocedure of the belt the steel case that hides the padlock is laid open.

13. The end of the waistbelt is lying next to the groove of the opened locking block
14. The end of the waistbelt is stuck into the groove of the locking block at the right tension
15. The knob at the end of the waistbelt is hooked into the right slot of the groove

Preparing for permanent wear

Staying chaste with help of a Carrara is not as easy as it may seem at first sight. Of course, the high-security-device guarantees total and eternal sexual abstinence once accurately locked. But because of its vastness, a slave in a way will have to 'learn' to wear a real Carrara-chastitybelt little by little to prevent physical problems with being locked up. When confronted for the first time with his new tool of discipline, he may become a little scared by its huge size and weight (pic 5). He often may get a spontanuous erectionmbecause of his excitement, that will make it impossible to apply the belt to the victim, as his penis has to be soft to get it well into the tube.

16. By pushing on the upper extension of the locking block the groove, with the knob of the waistbelt hooked in, will close. At once the hidden shackle of the padlock is pinned into its goldcase
17.The knob at the end of the waistbelt now is fixed in an irrevocable way into the chosen slot of the groove of the locking block. The key can be taken out of the padlock now at the lower side
18.The key has been taken out of the padlock securely. The wearer is totally safe now. He for his life cannot escape the locked belt around his waist and henceforth will stay chaste

Already taking hold of the penis by the keyholder with the purpose to do that, may have this effect. Therefore, after having applied the waistbelt around the slave's belly and taken the protector between the slave's legs to the front (thus automatically covering the slave's perineum with the connecting ass-string), the keyholder sometimes will have to act very quickly as son as the slave's penis has slackened a little, before stiffening starts again; once it is totally inside the tube, this will not be a problem anymore, and the belt can be closed and locked rapidly than to avoid further delay.

Once it is locked securely around his - preferably at the out-set clean-shaven - crotch (pic 19), the slave will because of the firm grip of the inflexible steel be immediately aware that he can't escape his fate, although at the initial stage of his enforced chastity he will, as he is irrevocable getting more and more horny after being locked up some time, more often make an attempt to that, by trying to push the belt over his hips or to cum inside through jerking the tube - both ALLWAYS in vain.

At the beginning the Carrara may feel very narrow, to narrow indeed, hurting and squeezing at a lot of places to the still unaccustomed body of the wearer. Therefore it is very advisable not to lock up the victim immidiately 'for ever', but give him time to get used to the permanent pressure, by extending the wearing-time more and more. After a few months of training his body should be adapted enough to the belt to make the semi-permanent wear possible for which this chastitybelt is specially intended and thus designed - and which, as in the design a lot provisions has to been made for that, makes the Carrara so expensive as well.

Because the steel of the belt will not yield to the flesh of the slave, the flesh of the slave will have to yield to the steel of the belt. As the steel, irrespective of the rubber lining inside, is hard and not flexible, to make this confrontation less painfull the flesh has to be as soft and flexible as possible. This means:

1. It is, before applying he belt, advisable to grease the waist, the genitals and especially the allways very sensitive gland of the penis with a lot of salve to avoid shaving of the skin and - in the case of the penis - to have unintended contact with the unlined innerside of the tube passing off more pliantly.

2. The beltwearer will from now on have to smother directly every beginning erection, because only when the penis is soft it can stand the tube; when hard steel is confronted with hard flesh, the steel will overcome the flesh, and the flesh become painfull.

19.The Carrara permanently locked on. Note the carefully clean-shaven crotch of the slave, thus intentionally prepared for long-time wear without hygienical problems

Adaptations of the slave's body and behaviour

After some time, the soft flesh of the belly will have adapted itself to the belt by receding at the sides; a longtime Carrara-chastityslave will also after unlocking the belt be recognizable by his narrowed waist between ribs and hips (see also pic 7). Still, although at the end his body has adapted itself to the feeling of the belt, he most of the time will be aware that he is locked up, as the huge locking-block of the protector, that has to be tight-fitting for absolute safety, is allways pressing a little bit against his lower belly (pic 9). Furtheron he nearly allways will feel the iron string cutting into his ass (pic 12) and, the string for escapepreventing reasons being joined in a very tight way to a special inflexible triangular transverse plate pointing downwards from the central back of the at that place relative high waist-belt (pic 11), moreover will feel it pushing a little onto his tail-bone permanently.

Lying down and sleeping while being belted is the most simple position and the first the wearer will get used to without problems. In the beginning, he might during his sleep still become regularly tormented by spontanuous morning erections, resulting in very painfull awakenings and a hopeless agony with his own sexual agitation. The only way out than is to wait patiently at the moment of slackening. But after several weeks, those harassments mostly - as they should to reach the intended internalisation of the slave's chastity - will fail to appear, as he penis of the wearer 'knows' there is no space for that anymore and the body of the wearer by that learned that to prevent punishment it has to suppress all unchaste feelings.

When sitting, a Carrara-belted slave should avoid very soft AND very hard chairs, because he will feel the ass-string in that case more. When standing, he will discover that the belt will force him to keep the upper part of his body rather straight for more comfort and at the same time to stretch out both bis buttocks slightly more backwards (pic 11). For walking, to prevent chafing of the innerside of the legs by the protectorm, a pair of narrow-fitting drawers is advisable. Still, for really running the belt is an obstacle.



See Also

Personal tools
Namespaces

Variants
Actions
Navigation
Tools